本文件这个时间完成：2024年9月19日 上午10:56:12,并这个时间更改：2025年7月4日 下午10:00:11。
In this document, we are going to introduce USB update mode.
Huawei USB Update Mode is a special mode that allows Huawei devices to receive firmware updates or system repairs through a USB connection. This mode is typically used for flashing firmwares and unbricking devices.
EMUI 9.X and Magic UI 2.X
Press the VOLUME UP key, VOLUME DOWN key, and the POWER key at the same time, until see the HUAWEI logo display. The phone enters the automatic upgrade mode, and the upgrade is started.
EMUI 10.X and Magic UI 3.X
Press the VOLUME UP key and the POWER key at the same time, then it will enter the recovery interface, then choose the “Update mode > USB update mode” to start the upgrade.
You can use the USB Firmware update procedure to install new or updated software on a device via a USB connection, which is particularly helpful if the device cannot boot, is malfunctioning, bricked, or is unable to complete a regular update.
Martview is not our official forum but it can bring help to all our customers, since the questions asked are answered by professionally relevant users and administrators there.
Open forumA continuously updated collection of Test Point photos, PCB Diagrams and Blueprints to help everyone easily find the test point pins on smartphone motherboards - all at one place!
Open Test point library