This document created at Aug 1, 2023, 10:36:19 AM and modified at Sep 21, 2023, 7:39:43 PM.
In this help, we are going to show you the process of using our Unisoc module.
To work on Unisoc/SPD devices in Chimeratool make sure that your drivers are up to date and you are using the latest version.
To check this, open Chimera and log in then go to SETTINGS, and click on Reinstall if you are not using the latest version.
Once you made sure that you are using the latest version, you can connect the device.
Usually, you have to connect the device by powering it off and then pressing the VOL DOWN button while connecting the phone to your computer.
An Autodetect procedure will start and you will need to select the chipset of the device from the drop-down menu.
After this, you will see the available procedures for the device.
*For the Firmware update procedure you need to use a PAC file, which is a specific file used for Unisoc/SPD.
Martview is not our official forum but it can bring help to all our customers, since the questions asked are answered by professionally relevant users and administrators there.Open forum
A continuously updated collection of Test Point photos, PCB Diagrams and Blueprints to help everyone easily find the test point pins on smartphone motherboards - all at one place!Open Test point library
This is our official English-language forum. We recommend it for all of our users, because many problems and errors have been described and answered here over the years.Open forum