This document created at Sep 21, 2023, 2:56:38 PM and modified at Nov 29, 2023, 7:10:59 AM.
In this help document, we are going to show you the process of doing an IMEI Repair and Patch Certificate document.
First of all to Repair the IMEI number you have to connect the phone in ADB mode, and then select Repair on the Repair tab, after that enter the desired IMEI numbers and press start.
Then after entering *#06# you will see the repaired IMEI number, and using the *#0011# you will see that the IMEI Status is NG.
To complete the procedure you will need to run a Patch Certificate procedure on the device in ADB mode as well.
You will need to click on the Repair tab and then on Patch Certificate.
Once the Patch Certificate is done, the IMEI Status should be OK after dialing *#0011#.
If some of the procedures did not work as described above, (IMEI wasn't repaired, or the IMEI Status is NG) you can do a factory reset on your device, flash a different stock firmware, with autoroot by Chimera and run the procedure again. The cause of the problem is the phone may have old patchcert solutions, or patchcert solutions from competitors, which cause big issues with our newest solution, since they are competing for the same resources.
Martview is not our official forum but it can bring help to all our customers, since the questions asked are answered by professionally relevant users and administrators there.Open forum
A continuously updated collection of Test Point photos, PCB Diagrams and Blueprints to help everyone easily find the test point pins on smartphone motherboards - all at one place!Open Test point library
This is our official English-language forum. We recommend it for all of our users, because many problems and errors have been described and answered here over the years.Open forum