This document created at Oct 8, 2021, 2:38:02 PM and modified at Aug 27, 2023, 2:27:32 PM.
How to use factory/bootrom mode service functions on Huawei devices with HarmonyOS
Due to some changes done by Huawei, phones that are updated to HarmonyOS, would not present the Huawei USB COM 1.0 serial port after test pointing. Without the Huawei USB COM 1.0 serial port Chimera cannot communicate to these devices in factory/bootrom mode.
You need to use a modified USB cable, we call it the "Harmony TP Cable". If this cable is used, Huawei USB COM 1.0 serial port is available and all Chimera factory/bootrom mode service functions will work on HarmonyOS models.
What you need:
Here is how-to make the cable:
Why do I see unknown device in Windows Device Manager?
Most probably you connected the cable to your computer first. Please make sure that you connect the cable to the phone first.
I disconnected the cable but I can still see the phone connected, why?
Most probably you disconnected the cable from the phone first, and not the computer. Please make sure that you always disconnect the cable from the computer first.
Martview is not our official forum but it can bring help to all our customers, since the questions asked are answered by professionally relevant users and administrators there.Open forum
A continuously updated collection of Test Point photos, PCB Diagrams and Blueprints to help everyone easily find the test point pins on smartphone motherboards - all at one place!Open Test point library
This is our official English-language forum. We recommend it for all of our users, because many problems and errors have been described and answered here over the years.Open forum