EUB mode without Test Point - ChimeraTool help

NotificationsTurn on notifications to get up-to-date application version information!Subscribe!  No thanks

EUB mode without Test Point

This document created at Oct 25, 2023, 11:11:40 AM and modified at Nov 27, 2023, 11:26:00 AM.

In this guide, we will show you how to connect your device to EUB mode without a hardware test point.

First, connect the phone to Chimera in Modem/ADB/Download mode and click on “Change to EUB mode”. The procedure will switch the phone to Download mode first then change it to EUB mode. Also, make sure your phone can be flashed in Download mode, if your phone cannot be flashed in Download mode this procedure won't work.

If the current firmware version of your phone is compatible it will boot into EUB mode instantly. If it is not compatible yet, you must run a Firmware Update procedure and flash it with a stock firmware that has the same or higher-bit version. The firmware can be the same as on your phone.  After this, you have to wait 30 minutes and retry the procedure. You won’t have to do this for the same model and firmware version again.

Now, in EUB mode every procedure will be shown, and you can start repairing your device.

To be able to boot in normal mode you need to run a “Boot Repair” procedure using the Automatic firmware detection tab by pressing the start button.

Martview forum

Martview is not our official forum but it can bring help to all our customers, since the questions asked are answered by professionally relevant users and administrators there.

Open forum

Test Points Library

A continuously updated collection of Test Point photos, PCB Diagrams and Blueprints to help everyone easily find the test point pins on smartphone motherboards - all at one place!

Open Test point library

GSMHosting forum

This is our official English-language forum. We recommend it for all of our users, because many problems and errors have been described and answered here over the years.

Open forum